NEED PROJECTILES? CLICK HERE
15/12/14
10/12/14
Fluted Browning BAR .308
27/11/2014
Suppressor on .22cal / .410 Combination Rifle.
18/11/14
3/9/14
41mm DIA DURALIUM SUPPRESSOR - Reduces recoil by half and removes 2/3rds noise
SUPPRESSOR ONLY $340 FITTED $405
9” 41mm
Suitable for 22 Hornet, 222, 223, 22-250, 243, 260, 270, 280, 308, 7.62x39, 30-06 etc (not magnums)
9” in length (230mm), sits 4” forward & 5” back over the barrel
Weight 320 – 330grams (alu internal muzzlebrake 5-6,000 rnds)
Colour - Black
13.5” 41mm Magnum
Suitable for 270wsm, 7mm saum, 7mm rem mag, 300wsm etc (not suitable for ultra mags)
13.5” in length (340mm), sits 5” forward & 8.5” back
Weight 460–470grams (s/s internal muzzlebrake 20,000 rnds)
Colour—Black
EXTRA’S
Blue Suppressor Bag additional $10.00
Barrel threading additional $65.00
(custom made thread protector cap incl. in threading price)
Neoprene Suppressor Cover 9" $24.00
Neoprene Suppressor Cover 13.5” $26.00
BUSHMASTER 223 M4 41mm dia
9” in length (230mm), 4” forward, 5” back Weight — 365grams approx s/s internal muzzlebrake—Black
29/8/14
http://cartridgecollectors.org/cmo/cmo10jun.htm
27/3/14
This interesting technique of fire forming wildcat cartridge brass using
the FL die screwed into the front of an old lee Enfield, a light fire forming
charge blows the brass out and the case is ready to go, obviously
benefits are that headspace can be set at whatever you want, and
the fired case is fully sized! Case pictured is a 30 Gibbs.
Case capacity for comparison with ball powder
270 win 62gns,
6.5-06AI 67gns.
.30 Gibbs 70.5
264 Win Mag 75.5gn
27/3/14 - Action lightening on a remington 700 long action, 100 grams removed off
the receiver, ready for a lightweight alpine rifle build
26/3/14
Parker Hale Safari 7mm rem mag rebarreled into 6.5-303, an unusual conversion that we haven't
done before
22/8/2013
Magazine slot modification to allow another 2.5mm
projectile protrusion
6/6/2013
Lighten Remington Bolt
Flute $138.00 incl GST
Firing Pin Assembly (fluted steel) $165.00 incl GST
Lighten Bolt Handle and Knob $138.00 incl GST
= $441 less 15% = $374.85
Please note if your bolt is blued, it will need to be reblued so will take longer than 7-10 working days to complete
Lightening Action (also allows top feed) $80 + GST ($92 incl GST)
We have been warning people about firing at animals too far away and
straining the barrel! and nek minit......boom!!!
16/4/2013
My own Remington .308 lightened up before I took it down to South
Westland for the 2013 roar. Without the suppressor and scope it was
under 5lb
Some of the weights before and after are:
Reciever 420gms to 332gms
Bolt 358gms to 239gms
Barrel 1.133gms to 766
Talley rings 60gms
stock screws 17gms to 12gms
Gunworks Duralite suppressor with all alu internals and micro isolator
tube 270gms
Tikka T3 7mm-08 with a few extra lightening mods, bolt and barrel
fluted, barrel nock's turned, barrel turned down under the suppressor
and the top of the reciever milled open for weight and ease of loading
fast through the ejection port
Interesting project at the test fire stage, started life as a saiga 20 gauge
semi auto. A .577 snider barrel was found and fitted, FRANKEIN-SNIDER
is now a genuine 7 shot gas operated semi auto firing 480gn Minie balls
with FFG black powder at a bit over 1000fps,
ANOTHER SUCESSFUL WAITANGI DAY
"MUSKET & CANNON SHOOT"
FUNDRAISING FOR OKAINS BAY MUSEUM 6/2/2013
EXPLODED CASE 5/2/2013